56
3BA00044-00 • 2013-05-23 • Rev. 4
ersa DIGITAL 2000 A
Adjusting the desoldering inserts
on the CHIP TOOL
Figure 12
■
Push up the adjusting collar set on the desoldering insert, and then
connect it to the CHIP TOOL. The retaining pin on the adjusting collar
set must engage with the heat sink on the CHIP TOOL.
■
Align desoldering inserts then fasten the adjusting collar set using the
hexagon socket screw wrench supplied.
A
ttention!
Overtightening the retaining screws may damage the heating element.
Note
:
We recommend buying additional adjusting collar sets when the inserts
are changed frequently. Order no.: E 045600 (optional).
5.5
Adapting to the component size
Figure 13
The limit position for the force-limitation device in the CHIP TOOL is
adjusted using the knurled head screw 1 (Fig. 13). When making this
adjustment, be sure that when the tool is closed, the desoldering inserts
only touch one another and do not bend.
H
exagon socket screw wrench
D
esoldering inserts
A
djusting
collar set
Heat sink
3
2
1
Functional description
