20
3BA00044-00 • 2013-05-23 • Rev. 4
ersa DIGITAL 2000 A
Funktionsbeschreibung
Soll nach einer Eingabe der Passwortschutz vor Ablauf der 30 Sekunden wieder aktiv
sein, muss die Station kurzzeitig ausgeschalten oder das vorhanden Passwort geändert
werden.
Hinweis:
Ist dem Anwender das Passwort nicht mehr bekannt, so kann die Station
auf die Werkseinstellungen zurückgesetzt werden. Alle vom Anwender
eingestellten Parameter und das Passwort werden dabei gelöscht!
(siehe
Kapitel 5.5/5.6)
Istwertanzeige
Sollwert
Einheit
Standby
Tip Offset
Kalibrierung
Energie
Passwort
Passwortüberprüfung
Eingabe des Passwortes
Passwortüberprüfung und
Rücksprung zum Parameter
---P