Kuppersbusch EKWE 320.S, Руководство по установке

Страница: 9 / 16

Installation instructions - EKWE/EKWH - USA
9
Cut-out in stone worktops
The cut-out can be made as for worktops made of solid surface. (Trimming
the cut-out for the honeycomb cooking zones) See “Cutout in worktops made
of solid surface”.
Cutting out the installation area and the openings
– Firstly cut out the installation area (with joints) from the worktop in one
piece.
– Cut the openings for the bottom pans of the honeycombs from the piece
which has been cut out.
Replacing the piece cut out into the worktop
Since stone worktops are not sensitive to heat, installation of honeycomb
cooktops into the worktop can be flush.
– Glue the piece cut out and processed as above 6.5 mm deeper into the
worktop.
The adhesive used to do so must be resistant to temperatures
exceeding 160 °C (320 °F).