background image

2

Installation instructions - EKWE/EKWH - USA

    

For your information...

Be sure to read the information in this manual carefully before
you install the honeycombs.

Please keep this manual in a safe place and pass it on to
future owners for their information and safety.

The following symbols are used in this operating manual:

[

The warning triangle will alert you about possible health 
risks or things that can cause potential damage to your 
appliance.

F

You’ll find useful hints and information when you see this
symbol.

Warranty

This warranty is extended to the original purchaser and
succeeding owners for products purchased for ordinary home
use. It does not cover its use in a commercial situation. Should
the appliance be sold by the original purchaser during the
warranty period, the new owner will continue to be protected
until the expiration date of the original purchaser’s warranty
period. Save your dated receipt or other evidence of the
installation/occupancy date. Proof of original purchase date is
needed to obtain service under warranty. The warranty applies
even if the owner should move during the warranty period.

KÜPPERSBUSCH does not assume any responsibility for con-
sequential or incidental damages. This warranty provides you
with certain legal rights. You may also have other rights which
may vary from state to state.

What Is Covered

For one full year from the date of the original purchase, we
will provide parts, service and labor in your home to repair or
replace any part of the cook top that fails because of a defect
in materials or workmanship. This service is provided free of
charge. All warranty service will be provided by our authorized
Customer Care professionals during normal business hours.

What Isn’t Covered

1. Service by an unauthorized agency will not be reimbursed. 

Likewise, the warranty doesn't cover any damage or 
repairs due to service performed by an unauthorized 
agency, or by the use of unauthorized parts.

2. Service visits to teach you how to use the appliance.

3. Service visits to correct the installation. You are 

responsible for providing electrical wiring and other 
connecting facilities.

4. Reset circuit breakers or replace home fuses.

5. Damage resulting from accident, alteration, misuse, 

improper installation, abuse or installation not in 
accordance with local electrical codes, or improper 
storage of the appliance.

6. Repairs due to other than normal household use.

Disposing of the packaging
and the old appliance

Be sure to dispose of the transport packaging properly.
Disposal should not have a negative impact on the
environment. Recycling the packaging saves raw materials
and reduces the amount of waste.

Be sure to dispose of your old appliance properly, as well.
Even if it can no longer be used, it still contains useful
materials. Before discarding an old appliance, disconnect the
power cord to prevent it from becoming a hazard. 

Contents

Safety instructions . . . . . . . . . . . . . . . . . . . . . . .  3
General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  3
Installation conditions . . . . . . . . . . . . . . . . . . . . .  3
Dimensions and distances  . . . . . . . . . . . . . . . . .  4
An overview of the honeycomb dimensions . . . . . .  5

Cooking unit EKWH 320.14 / 320.18 / 320.18 Z
Control unit EKWE 320.W / S

Installing the honeycombs/honeycomb cooking units 6

Instructions for installing the honeycombs
Measuring and marking out the worktop cut-outs
Marking out the cut-out
Cut-out in worktops made of solid surface
Cut-out in stone worktops

Electrical connection. . . . . . . . . . . . . . . . . . . . .   11

Connecting the honeycomb cooking units to the 

control honeycomb and to the power module

Programming the control honeycomb in 
accordance with the cooking zone layout  . . . . . .  13

For technical information and/or 

replacement parts, please contact the

Küppersbusch Customer Care line 

at

1-800-459-0844

For the most efficient assistance, 

please have the Model and Serial 

numbers for the appliance available.

Содержание EKWE 320.S

















Отзывы: