Kuppersberg WD 1488, Технический паспорт

Страница: 16 / 64

16
TECHNICAL PASSPORT ENGLISH
Washing Dryer Machines
until h24 appears on the display, at
which point pressing the button again
will reset the delay start to zero.

Confi rm by pressing the
START/PAUSE button. The delay
countdown will begin and when it
has fi nished the programme will start
automatically.

It is possible to cancel the delay
start by turning the programme selector
to OFF.
If there is any break in the power supply
while the machine is operating, a special
memory stores the selected programme
and, when the power is restored, it
continues where it left OFF.
The option buttons should be selected
before pressing the START/PAUSE
button. If an option is selected that
is not compatible with the selected
programme then the option indicator
light fi rst fl ashes and then goes off.
OPTIONS button
This button allows you to choose
between three different options:
DRYING SELECTION button

For automatic washing/drying
cycle: after the selection of washing
programme according to laundry type,
select a degree of dryness by pressing
this button. At the end of the washing
programme, the selected drying cycle
will start automatically.
If a washing programme is not
compatible with automatic drying
selected, this function will not be
activated.
If you exceed the maximum dryable load
of laundry indicated in the programme
table, the laundry may not be dried
satisfactory.

If you want delete the selection
before the programme starts, please
press repeatedly the button until
the lights go off or reposition the
programme selector to the OFF position.

Drying only cycle:
select via the knob the desired
drying programme in conjunction with
your fabrics, by pressing this button it
is possible to select a degree of dryness
that is different to the default one
(except for the wool drying programme).

To cancel the cycle during the
drying phase, please press the button
for about 3 seconds.
WARNING:
After cancelling the drying
programme, the cool down phase
will begin and please wait for about
10/20 minutes before opening the
door.

“End” will appear in the display
at the end of the program and the
DOOR LOCKED light will go off, it is now
possible to open the door.
It is also possible to cancel the drying
cycle by turning the programme selector
to the OFF position. It is necessary to
wait for the cooling phase’s end (10/20