Kuppersberg WD 1488, Технический паспорт

Страница: 24 / 64

24
TECHNICAL PASSPORT ENGLISH
Washing Dryer Machines

Select the degree of dryness that
you require:
EXTRA DRY
(suitable for towels, bathrobes and
bulky loads).
IRON DRY
(that leaves the laundry ready for
ironing).
CUPBOARD DRY
(for items that will be put away
without ironing).

The washer dryer will calculate
the time needed for drying and the level
of moisture remaining in the laundry,
according to the load and drying type
selected.

Check that the tap is turned
on and that the discharge hose is
positioned correctly.
WARNING:
Do not dry woollen garments or
articles with special padding (e.g.
quilts, quilted anoraks, etc.) and very
delicate fabrics. If garments are drip/
dry, load less items as to prevent
creasing.

Press the START/PAUSE button
(the display will show the drying time
remaining).
The appliance calculates the time to the
end of the selected programme based
upon a standard loading. During the
cycle, the appliance corrects the time
according to the size and composition
of the load.
During the drying phase the drum
will accelerate to a higher speed to
distribute the load and to optimize the
drying performance.

When the programme is fi nished
the word «End» will appear on the
display. After 5 minutes the appliance
will go into standby mode (on certain
models, the display will show two lines).

Switch off the machine by
turning the programme selector to the
OFF position.

Open the door and remove the
laundry.

Turn off the tap.
CANCELLING THE DRYING
PROGRAMME

To cancel the drying programme,
press and hold the DRYING SELECTION
button for about 3 seconds.
WARNING:
After cancelling the drying
programme, the cool down phase
will begin and you must wait for
about 10/20 minutes before opening
the door.
In order to ensure the correct operation
of the appliance, it is advisable not to
Interrupt the drying phase unless it is
absolutely necessary.