Kuppersberg WD 1488, Технический паспорт

Страница: 17 / 64

17
ENGLISH TECHNICAL PASSPORT
Washing Dryer Machines
minutes) and the DOOR LOCKED light to
go off before opening the door.
RAPID / STAIN LEVEL button
This button allows you to choose
between two different options,
depending on the selected programme.
RAPID
The button becomes active when
you select the RAPID (14/30/44 Min.)
programme on the knob and allows
you to select one of three durations
indicated.
STAIN LEVEL button

Once the programme has been
selected the wash time set for that
programme will be automatically
shown.

This option allows you to choose
between 3 levels of wash intensity
modifying the length of the programme,
depending on how much the fabrics
are soiled (can only be used on some
programmes as shown in the table of
programmes).
TEMPERATURE SELECTION
button

This button allows you to change
the temperature of the wash cycles.

It is not possible to raise the
temperature over the maximum allowed
for the programme, in order to protect
the fabrics.

If you want carry out a cold wash
all the indicators must be off.
SPIN SPEED button

By pressing this button, it is
possible to reduce the maximum speed,
and if you wish, the spin cycle can be
cancelled.

If the label does not indicate
specifi c information, it is possible to
use the maximum spin expected in the
program.
To prevent damage to the fabrics, it
is not possible to increase the speed
over the maximum allowed for the
programme.

To reactivate the spin cycle press
the button until you reach the spin
speed you would like to set.

It is possible to modify the spin
speed without pausing the machine.
An over dosing of detergent can cause
excessive foaming. If the appliance
detects the presence of excessive foam,
it may exclude the spinning phase or
extend the duration of the program and
increase water consumption.
The machine is fi tted with a special
electronic device, which prevents
the spin cycle should the load be
unbalanced. This reduces the noise
and vibration in the machine and so
prolongs the life of your machine.
KEY LOCK

Pressing simultaneously the
buttons TEMPERATURE SELECTION
and SPIN SPEED for about 3 seconds,
the machine allows you to lock the