Kuhse KGM - KEA, Руководство пользователя

Страница: 62 / 75

Manual
Kuhse Gateway Module
KGM - KEA
HB-KGM-KEA_EN Version 01
Date: 23rd. May 2017
Page 62 of 75
8.3.1.2 Status messages
Bit DW 08 DW 10
Bit 15 Collective fault, all alarms TEST operating mode
Bit 14 Collective fault switch-off AUTO operating mode
Bit 13 Collective fault warning MANUAL operating mode
Bit 12 Gen. Voltage is good OFF operating mode
Bit 11 Parameterisation is on Generator circuit breaker is on
Bit 10 Triggering vector shift Mains circuit breaker is on
Bit 09 Triggering df/dt Genset is running
Bit 08 Triggering du/dt Genset available
Bit 07 Not assigned Monitoring VDE (only PA, from v07)
Bit 06 Not assigned Parallel operation (only PA, from v07)
Bit 05 Not assigned Automatic system locked
Bit 04 Not assigned External quick stop
Bit 03 Collective fault, all alarms Manual quick stop
Bit 02 Collective fault switch-off Remote start
Bit 01 Collective fault warning Peak load demand
Bit 00 Cos phi controller impeded Mains failure
Bit DW 12 DW 14
Bit 15 Gen. overfrequency CanOpen input module 1, input 8
Bit 14 Gen. underfrequency CanOpen input module 1, input 7
Bit 13 Gen. overvoltage CanOpen input module 1, input 6
Bit 12 Gen. undervoltage CanOpen input module 1, input 5
Bit 11 Mains overfrequency CanOpen input module 1, input 4
Bit 10 Mains underfrequency CanOpen input module 1, input 3
Bit 09 Mains overvoltage CanOpen input module 1, input 2
Bit 08 Mains undervoltage CanOpen input module 1, input 1
Bit 07 Waving flag* CanOpen input module 2, input 8
Bit 06 Gen. asymmetric load CanOpen input module 2, input 7
Bit 05 Gen. overcurrent II CanOpen input module 2, input 6
Bit 04 Gen. overcurrent I CanOpen input module 2, input 5
Bit 03 Horn* CanOpen input module 2, input 4
Bit 02 Mains asymmetric load CanOpen input module 2, input 3
Bit 01 Mains overcurrent II CanOpen input module 2, input 2
Bit 00 Mains overcurrent I CanOpen input module 2, input 1