Manual
Kuhse Gateway Module
KGM - KEA
HB-KGM-KEA_EN Version 01
Date: 23rd. May 2017
Page 36 of 75
6.3.6
PROFINET configuration
The PROFINET settings re implemented under this menu point. The PROFINET connection is implemented
exclusively via Ethernet interface B (ETH B). 128 bytes IO is set as the module size.
ATTENTION!
The settings for the KEA PROFINET Gateway are already pre-configured and must not be changed.
The name and IP assignment for the KGM are implemented with the development environment of the IO
controller.
Many IO controllers can also assign an IP address to the respective IO device by
means of the configured name. In the case of Siemens, this is possible by ticking in
the hardware configuration.
Assign device name:
Assign IP address through IO controller:
Module size as 128 bytes IO:
