Kuhse KGM - KEA, Руководство пользователя

Страница: 31 / 75

Manual
Kuhse Gateway Module
KGM - KEA
HB-KGM-KEA_EN Version 01
Date: 23rd. May 2017
Page 31 of 75
CAN bus parameters
The following parameters can be set for each CAN interface (CAN A / CAN B):

Activated/deactivated (= on/off)

Bit rate (=25/50/100/125/250/500 kBit/s)
RS232 parameters
The following parameters can be set for each RS232 interface (RS232 A / RS232 B):

Activated/deactivated (= on/off)

Baud rate (e.g. 57600)

Data bits (5/6/7/8)

Parity (None/Even/Odd)

Stop bits (1/2)

Process control (Off; RTS/CTS;XON/XOFF)
RS485 parameters
The following parameters can be set for each RS485 interface (RS485 A / RS485 B):

Activated/deactivated (= on/off)

Baud rate (e.g. 57600)

Data bits (5/6/7/8)

Parity (None/Even/Odd)

Stop bits (1/2)
Please note that the bus system must be properly terminated for
correct operation of the RS485 and CAN bus interfaces
Ethernet parameters
The following parameters can be set for each Ethernet port (ETH A / ETH B):

Address assignment in the network (static = fixed, defined IP/DHCP = port adopts an address
from a DHCP server during the boot process)

IP address (e.g. 192.168.1.1)

SubNet mask (e.g. 255.255.255.0)

Gateway address (e.g. 192.168.1.2)