Mounting and Installation
E 811 GB
17
27/02/2013
4 Mounting and Installation
Control and display monitor Ventura Vico is designed for installation into a
front panel or HM interface for machine and systems engineering. One con-
straint is that the unit must not be used in explosive areas.
Heat dissipation
To enable sufficient heat dissipation through convection (heat exchange) at
the housing surface, the air should be allowed to flow freely around the
housing of Ventura Vico. This specifically applies to the rear of the unit.
Please note that excessive temperature could shorten the life expectancy of
the monitor.
4.1 Front Panel Opening
Model
Width A
Height B
Ventura Vico 1000
250 mm
202 mm
Ventura Vico 1200
296 mm
240 mm
Ventura Vico 1500
354 mm
277 mm
A
B