KUHN HAYBOB 300, Руководство оператора

Страница: 52 / 78

50
Maintenance
Tedder-rake combination
HAYBOB 300
3. General
-
„ „
Directions
Direction specifications (left, right, front, rear) are always
meant in relation to direction of travel.
„
Maintenance terms
In the table below you will find some short explanations
of the most common maintenance tasks.
„
Lubricants specifications
At all maintenance tasks, secure the machine in the operating position. In case the transport position is required,
this is mentioned separately.
Direction Description
Left Counterclockwise
Right Clockwise
Rotation around a horizontal axis As seen at right angles to the direction of travel from left to right
Rotation around a vertical axis As seen from top to bottom
Task Explanation
Grease Apply grease to the sliding surface by using a brush
Lubricate One or two presses with a grease gun, unless stated otherwise.
Oil Apply an oil film to the sliding face
Replenish Fill up fluids, oil or lubricants to the indicated maximum level.
Replace
Remove a part and install a new part. Drain fluids, oils or lubricants and
replenish to the indicated maximum level.
Check
Check the condition of parts and components, and replace if necessary.
Check the levels of all fluids, oils and lubricants, replenish to the
indicated maximum level if necessary.
Lubricant Specifications
Oil Class NLGI2, K2k in accordance with DIN 51825
Grease Multipurpose, grade 00/000 EP