KUHN HAYBOB 300 Скачать руководство пользователя страница 41

Страница: 41 / 78

Operation

Tedder-rake combination

HAYBOB 300

Operation

1. Safety

Obey the safety instructions
Observe the safety instructions for carrying out all kind of jobs. Any disregard for safety

instructions may lead to serious or fatal injuries.

Safety instructions, see page 12.

Wear safety shoes

During all jobs at the machine never bring your feet under the machine and always wear safety shoes, to

decrease the risk of serious injuries.

Carrying people and oblects on the machine is prohibited

Neither persons nor objects are allowed to be transported at the machine at any time. Only parts stored in their

dedicated storage locations are allowed to be transported at the machine. Riding on the machine is hazardous
and strictly prohibited.

No persons in the turning area

Take care of no people be in the turning and working area of the machine. People can get grabbed by the

machine. Serious or deadly injuries can occur.

Take care for a clear view at the machine

Always take care for a clear view at the machine and monitor the machine during mowing. Only start mowing if

the direct surrounding is free from any persons and objects, to avoid serious or fatal injuries.

Note the contour of the terrain

Be carefull when working on a slope. Avoid slopes on which the combination of tractor and machine could slip

away or turn over. Fatal injuries and material damages can occur.

PTO speed 540 rpm

The prescribed PTO speed of maximum 540 rpm may not be exceeded. Higher PTO speeds can damage the

machine.

Do not compress the PTO drive shaft

During operation or transport the PTO drive shaft may not be compressed. Compressed PTO drive shafts can

cause damages to the tractor and machine.

Maximum hydraulic oil pressure 210 bar (3045 psi)

The prescribed maximum hydraulic oil pressure of 210 bar (3045 psi) may never be exceeded.

A higher hydraulic oil pressure can damage the machine.

Содержание HAYBOB 300















































































Результаты поиска

Содержание HAYBOB 300

Отзывы:

Похожие инструкции для HAYBOB 300

Бренды по названию

Популярные бренды

KUHN HAYBOB 300, Руководство оператора

Результаты поиска

Содержание HAYBOB 300

Отзывы:

Похожие инструкции для HAYBOB 300

Бренды по названию

Популярные бренды