KUHN HAYBOB 300, Руководство оператора

Страница: 47 / 78

Operation
Tedder-rake combination
HAYBOB 300
45
- Set deflectors as required using stays (8).
Always make certain that the distance between the
deflectors is large enough, especially in a heavy crop to
prevent material from being pulled out of the swath.
When you place the deflectors as shown in fig. the
swaths are laid down close together in the first operation.
These swaths are easily put together afterwards
Each deflector (5) also can be set into two vertical
positions by rotating the nylon blocks (11) through 180°.
Use the upper position under abrasive conditions.
When adjusting the top link ensure a safe
distance to the tines of the rotating rotors is
kept!