KUHN GMD 801, Руководство по сборке и эксплуатации

Страница: 38 / 48

- 36 -
OPTIONAL EQUIPMENT
1. HYDRAULIC ADAPTATOR (fig. 53)
Part No. 823 012 06
An adaptator M16 x 1.5 / 1/2 NPT - 24 is available.
2. PTO SHAFT 1 3/8" - 21 SPLINES
Part No. 4600 413
This PTO shaft is available for tractors with 1 3/8" - 21 spline PTO shafts (standard equipment for North America).
3. SIGNALLING ELEMENTS (photo 54)
Kit No. 106 6000
Signalling elements can be ordered as an optional
extra. To install this kit proceed as follows :
- Attach tail lamp (N) to panel (A).
- Bolt panel (A) to support (S) with 3 hexagon screws
(E) (M 10 x 20), 3 plain washers (dia. 11 x 24 x 2) and
3 self-locking nuts (M 10).
- Attach guide (H) to the bottom of gearbox (L) with 1
hexagon screw (T) (M 12 x 20) and 1 spring washer
(M 12) as shown on photo 54.
- Plug electric cable (O) into the lamp terminal (N).
In transport position mount the panel (A) with its
support (S) in the guide (H) with lock (U) and plug
electric cable (O) at the rear of the tractor.
Before putting the machine in
work position, don't forget to
unbolt the panel.
4. RAISED SKIDS (fig. 55)
Kit No. 107 6180
A raised skid shoe kit comprising 2 raised skids is
available as an optional equipment. This kit serves 2
purposes :
- providing a cutting height adjustable between 60 mm
and 120 mm (2.5" and 5"),
- operating on sticky grounds.
This 2 raised skids are installed instead of the 2 regular
end skids.
55
All manuals and user guides at all-guides.com