KUHN GMD 600 Скачать руководство пользователя страница 2

Страница: 2 / 48

DEAR OWNER,

In buying a

KUHN

machine you have chosen wisely. Into it have gone years of thought,

research and improvements. You will find, as have thousands of owners all over the world, that

you have the best that engineering skill and actual field testing can produce. You have

purchased a dependable machine, but only by proper care and operation can you expect to

receive the performance and long service built into it.

This manual contains all the necessary information for you to receive full efficiency from your

machine. The performance you get from this machine is largely dependant upon how well you

read and understand this manual and apply this knowledge. Please DO NOT ASSUME THAT

YOU KNOW HOW TO OPERATE AND MAINTAIN YOUR MACHINE before reading this

manual carefully. KEEP THIS MANUAL AVAILABLE FOR REFERENCE.

Your

KUHN

dealer will instruct you on the general operation of your machine. He is interested

that you get the best performance possible and will be glad to answer any special questions

that may arise regarding the operation of the

KUHN

machine.

Your

KUHN

dealer can offer a complete line of genuine

KUHN

service parts.

These parts are manufactured and carefully inspected in the same factory that builds the

machine to assure high quality and accurate fitting of any necessary replacements.

When ordering service parts it is important that you indicate the type of machine concerned

and its serial number.

For this reason please complete the model identification plate diagram below with the required

information. This will provide you with an easy reference for future service parts orders.

ABOUT IMPROVEMENTS

KUHN

is continually striving to improve its products and, therefore, reserves the right to make

improvements or changes when it becomes practical to do so, without incurring any

obligations to make changes or additions to the equipment sold previously.

All manuals and user guides at all-guides.com

Содержание GMD 600

















































Результаты поиска

Содержание GMD 600

Отзывы:

Похожие инструкции для GMD 600

Бренды по названию

Популярные бренды

KUHN GMD 600, Руководство по сборке и эксплуатации

Результаты поиска

Содержание GMD 600

Отзывы:

Похожие инструкции для GMD 600

Бренды по названию

Популярные бренды