KUHN GMD 600 Скачать руководство пользователя страница 24 | Manualshive

Страница: 24 / 48

KUHN GMD 600 Скачать руководство пользователя страница 24

- 22 -

WARNING : BEFORE PUTTING THE MACHINE IN WORK OR TRANSPORT POSITION, ENSURE

ALL PERSONS ARE WELL CLEAR OF THE CUTTERBAR PIVOTING AREA.

1. Pressurize the disc mower's lift cylinder so that the cutterbar closes up against its stop.

2. Pull cord (F) to free latch (C) (photo 27).

3. Lower the cutterbar down to the horizontal position by releasing hydraulic pressure. Keep cord pulled until

cutterbar is lowered half-way, as cord also activates stop plate (D) which unlocks the spring compensating

system.

4. Release lock by applying pressure with the hand palm (arrow 1) and fold front safety bar (V) downwards

(arrow 2) (photo 28) till it is automatically locked in working position.

Adjustment of chassis height from the

ground

1.

For tractors equipped with hydraulic position

control function

, set position control so that lower

hitch pins are 450 mm (18") from the ground (photo

29).

In this case the stop chain delivered with the

machine must not be used.

WORKING POSITION AND ADJUSTMENTS

All manuals and user guides at all-guides.com

«
...
22
23
24
25
26
...
»

Содержание GMD 600

















































Отзывы:

Нет отзывов