KUHN GMD 600 Скачать руководство пользователя страница 7

Страница: 7 / 48

- 5 -

POWER TAKE-OFF

1. Only use PTO shaft supplied with the machine or recommended by the manufacturer.

2. PTO guards must always be in place and in good condition.

3. Check for correct PTO overlap when at work and in transport.

4. Before attaching or removing the PTO shaft, disengage PTO shaft, turn off engine and remove ignition key.

5. If a primary PTO shaft is equipped with a slip clutch or a free wheel, these must be fitted on the machine PTO.

6. Ensure that PTO shaft is always correctly fitted and locked into place.

7. Make sure guards are correctly in place and secured with the safety chains provided.

8. Before engaging PTO, ensure that PTO speed and direction are in accordance with manufacturer's recommen-

dations.

9. Before engaging PTO, keep all people and animals clear from the machine.

10. Never engage PTO shaft when tractor motor is turned off.

11. Never surpass PTO angle recommended by the manufacturer.

12. WARNING ! Rotating elements can continue turning momentarily after PTO is disengaged. Keep clear until all

rotating elements are at a standstill.

13. When removing the machine, locate PTO shaft on the supports provided.

14. Fit safety cap on tractor PTO.

15. Replace any worn or damaged PTO guards immediately.

HYDRAULIC SYSTEM

1. WARNING ! Hydraulic system is under pressure.

2. When fitting hydraulic motors or cylinders, ensure that connections have been made correctly, as per

manufacturers instructions.

3. Before connecting hoses to the tractor hydraulics, ensure that tractor and machine circuits are not under

pressure.

4. It is strongly recommended that the operator marks the hydraulic connections between tractor and machine to

avoid making a wrong connection. WARNING ! Functions could be reversed (for example : lift/lower).

All manuals and user guides at all-guides.com

Содержание GMD 600

















































Результаты поиска

Содержание GMD 600

Отзывы:

Похожие инструкции для GMD 600

Бренды по названию

Популярные бренды

KUHN GMD 600, Руководство по сборке и эксплуатации

Результаты поиска

Содержание GMD 600

Отзывы:

Похожие инструкции для GMD 600

Бренды по названию

Популярные бренды