- 35 -
4. Inside swath wheel (kit No. 103 6130)
To reduce swath width to 1,50 m (approx. 4' 11"), an
inside swath wheel can be mounted on the
GMD 600
.
The swath wheel (E) is attached to the frame pipe with
2 screws (A) (M 12 x 20) and 2 conical spring washers
as shown in photo 47.
Torque of screws :
12 daNm/88 ft.lbs.
5. Lengthened left hitch pin
(kit No. 568 207 00)
For offsetting the machine up to 200 mm (8") a
lengthened hitch pin (T) (photo 48) can be mounted on
the left arm of the 3-point frame (looking in the direction
of travel).
Installation : see pages 17 and 18.
6. Wear plate (568 017 00)
To prolong the life of worn disc guards when working in
very difficult and abrasive conditions, wear plates are
available through our spare parts department for welding
to the underside of each individual disc guard (fig. 49).
7. Raised skids
(fig. 50)
Kit No. 103 6190
A raised skid shoe kit comprising 2 raised skids is
available as an optional equipment. This kit serves 2
purposes :
- providing a cutting height adjustable between
35 mm and 90 mm (1.5" and 3.5"),
- operating on sticky grounds.
This 2 raised skids are installed instead of the 2 regular
end skids.
All manuals and user guides at all-guides.com