KUHN GA 8001 H, Руководство по сборке и эксплуатации

Страница: 38 / 52

- 36 -
TRANSPORT
KEEP ALL PERSONS AWAY FROM THE VICINITY OF THE MACHINE BEFORE
PIVOTING THE OUTER ROTORS INTO TRANSPORT POSITION.
IN TRANSPORT AND DURING WORK, THE PARKING STAND MUST ALWAYS BE IN
THE RAISED POSITION.
NEVER LET THE ROTORS ROTATE WHEN THE MACHINE IS IN TRANSPORT
POSITION DUE TO RISKS OF ACCIDENT.
NEVER TRANSPORT THE GA 8001 H AT MORE THAN 25 KM/H (16MPH).
To fold the machine into the transport position (photo 26), proceed as follows :
- Use handles (3) to unlock safety guards (2) and fold them to the inside (see arrows, photo 22). Guards will
automatically be locked in place once in the transport position.
- Store handles (3) in the spring clips (4) (photo 22).
- Disconnect the tines arms (5) on each rotor and place them into the racks (6 and 7)provided (photo 23).
Secure tine arms (5) with linch pins (photo 23).
- From the tractor seat, pull on cords (8) (photo 24) and activate the tractor’s hydraulics to raise the rotors.
- Once the rotors are raised into the transport position, release the cord and make sure that the locks (9 and
10) are properly engaged (photo 25).
- Check that plug of the light and signal system is properly connected and ensure that all signal lights are
functioning correctly.
TRANSPORT OF THE MACHINE ON ROADS IS THE OPERATOR’S RESPONSIBILITY
AND HE MUST ENSURE THAT THE MACHINE IS IN LINE WITH THE HIGHWAY CODE
OF THE COUNTRY CONCERNED.
ALWAYS CHECK THAT THE REAR LIGHTS AND INDICATORS ARE CLEAN AND
FUNCTIONING CORRECTLY BEFORE GOING ON THE ROAD.