KUHN FC703, Руководство оператора

Страница: 29 / 100

Putting into service
Mower conditioner
FC703 RA*
27
„
Positioning and parking
The control box must be easily accessible from the
tractor cab.
Control box mounting
Fit control box using:
- 4 screws diameter D = 5.2 mm (0.2’’) and with a hole
to hole distance of A = 50 mm (1.96’’) and B = 127 mm
(5’’).
Control box removal
Disconnect and store control box in a dry and clean
place.
„
Control box protection
A 15 Amper fuse protects the control box against
excessive electrical current. Part no. 83233046.
„
Description of the connection
- The control box (1) is connected to electric relay box
(2).
For tractors not fitted with a 3-pin socket, a wiring
harness can be ordered under (Part no. 83233001).
Connect the wiring harness directly to the battery
terminals respecting the polarities.
The wiring harness is fitted with a 15 Amp ATO type fuse
(Part no. 82333019).
Never connect battery charger or perform
welding tasks without having previously
disconnected the control box.
Do not connect the wiring harness to the
starter connections.
Check that the connectors are in a good
condition and clean.