KUHN FC703, Руководство оператора

Страница: 86 / 100

Mower conditioner
84
FC703 RA*
Maintenance and storage
Pivot special tool downwards to free spring plate from
screw head.
Knives can be turned over on the same disc to use the
other cutting edge or replaced. On each knife, an arrow
indicates the disc's direction of rotation.
Make sure that the securing nut and bolt are in good
condition and if necessary, replace them. Torque:
12 daN m (89 lbf ft).
Dull knives require more horse power and have a
negative effect on the cut quality.
Check that screw head (2) is free to slide in spring plate
hole (3).
Remove special tool.
Rotate disk by half a turn.
Repeat previous tasks.
Repeat previous tasks on the other disks.
Knife for disk rotating to the left: Part
no. K6801410
Knife for disk rotating to the right: Part
no. K6801420
Bolt: Part no. K6801010 (2).
Nut: Part no. 80201262 (1).