Kubota Z231BR-AU, Руководство оператора

Страница: 80 / 85

BATTERY TROUBLESHOOTING
Symptom (if) Cause Remedy Preventive measure
The starter does not function. • Battery overuse, dim
lights. • Charge the battery
sufficiently. • Charge the battery properly.
• The battery has not
been recharged.
• Poor terminal con-
nection. • Clean the terminal
and tighten securely. • Keep the terminal clean and tight.
Apply grease and treat with anti-cor-
rosives.
• The battery life has
expired. • Replace the battery.
The starter does not function from the
beginning, and lights soon become dim. • Insufficient charging. • Charge the battery
sufficiently. • The battery must be serviced prop-
erly before initial use.
When viewed from top, the top of plates
look whitish. • Battery was used
with an insufficient
amount of electrolyte. • Add distilled water
and charge the bat-
tery. • Regularly check the electrolyte lev-
el.
• Battery was used too
much without re-
charging. • Charge battery suffi-
ciently. • Charge the battery properly.
Recharging is impossible. • The battery life has
expired. • Replace the battery.
Terminals are severely corroded and
heated up. • Poor terminal con-
nection. • Clean the terminal
and tighten securely. • Keep the terminal clean and tight.
Apply grease and treat with anti-cor-
rosives.
The battery electrolyte level drops rapid-
ly. • There is a crack or
pin holes in the elec-
trolytic cells. • Replace the battery.
• Charging system
trouble.
• Contact your local
KUBOTA Dealer.
If you have any questions, contact your local KUBOTA Dealer.
MACHINE TROUBLESHOOTING
Symptom (if) Cause Remedy
The machine operation is not
smooth. • The hydrostatic transaxle fluid is insufficient. • Fill oil.
• The filter is clogged. • Replace the filter.
The machine does not move
while the engine is running. • The parking brake is on. • Release the parking brake.
• Transaxle fluid level is insufficient. • Fill oil.
The machine moves when the
motion control levers are in the
“NEUTRAL LOCK” position (op-
erating the engine).
• The hydrostatic lever linkage is not correctly
adjusted. • Ask your dealer for hydrostatic lever linkage
adjustment.
• The control linkage pivots are sticking. • Lubricate linkage.
If you have any questions, contact your local KUBOTA Dealer.
BATTERY TROUBLESHOOTING TROUBLESHOOTING
Z231BR-AU,Z231KH-AU,Z251BR-AU,Z251KH-AU
77