Kubota Z231BR-AU, Руководство оператора

Страница: 52 / 85

(1) Air cleaner cover (A) “UNLATCH”
(B) “REMOVE”
(1) Air cleaner cover
(2) Air cleaner element
(3) Precleaner (A) Air intake
3. Wash the precleaner in warm water with detergent.
Rinse the precleaner thoroughly until all traces of
detergent are eliminated. Squeeze out excess
water. (do not wring.) Allow the precleaner to air
dry.
4. Saturate the precleaner with new engine oil.
Squeeze out all excess oil.
5. Reinstall the precleaner over the paper element
and install in air intake.
6. Reinstall the air cleaner cover and secure with the 2
latches.
2. Cleaning air cleaner element
(Z231BR-AU, Z251BR-AU)
Every 100 hours of operation or annually replace the
paper element. Check every 25 hours of operation.
(More often under extremely dusty or dirty conditions.)
Z231BR-AU
1. Loosen the air cleaner cover knobs and remove the
air cleaner cover.
(1) Air cleaner cover
(2) Air cleaner cover knob
2. Remove air cleaner element with precleaner.
(1) Air cleaner element
(2) Precleaner (A) Air intake
(B) Base
3. Remove the precleaner from the paper element.
4. Gently tap the paper element to dislodge dirt. Do
not wash the paper element or use pressurized air,
as this will damage the element. Replace a dirty,
bent, or damaged element with a genuine part.
Handle the new element carefully; do not use if the
sealing surfaces are bent or damaged.
5. Clean the air cleaner base as required and check
condition.
6. Reinstall the precleaner over the paper air cleaner
element and install it on the base.
7. Reinstall the air cleaner cover and secure it with 2
knobs.
NOTE :
• Operating the engine with loose or damaged
air cleaner components could allow
unfiltered air into the engine causing
premature wear and failure.
Z251BR-AU
1. Loosen the air cleaner cover knobs and remove the
air cleaner cover.
EVERY 25 HOURS PERIODIC SERVICE
Z231BR-AU,Z231KH-AU,Z251BR-AU,Z251KH-AU
49