Kubota Z231BR-AU, Руководство оператора

Страница: 53 / 85

(1) Air cleaner cover
(2) Air cleaner cover knob
2. Open the latch and remove the air cleaner element.
(1) Air cleaner cover
(2) Air cleaner cover knob
(3) Latch
(4) Air cleaner element
3. Gently tap the paper element to dislodge dirt. Do
not wash the paper element or use pressurized air,
as this will damage the element. Replace a dirty,
bent, or damaged element with a genuine part.
Handle the new element carefully; do not use if the
sealing surfaces are bent or damaged.
4. Clean the air cleaner base as required and check
condition.
5. Reinstall the air cleaner element and close the
latch.
6. Reinstall the air cleaner cover and secure it with 2
knobs.
NOTE :
• Operating the engine with loose or damaged
air cleaner components could allow
unfiltered air into the engine causing
premature wear and failure.
EVERY 50 HOURS
1. Checking the engine start system
The engine start system in your machine is designed to
protect you while operating. Check the engine start
system periodically (daily is best) to test the function of
the engine start system before operation.
WARNING
To avoid serious injury or death:
• Do not allow anyone near the machine while
testing.
• If the machine does not pass one of the
following tests, do not operate the machine.
Consult your local KUBOTA Dealer.
• Sit on the operator's seat for all tests except for
test 1.
IMPORTANT :
• Test the following before operating the
machine:
(1) Parking brake lever
(2) Motion control lever
(3) Key switch
(4) PTO switch
(5) Seat switch
Test 1 (operator not on the seat)
1. Securely set the parking brake.
2. Set the PTO switch to the
“DISENGAGE” (OFF)
position.
3. Set the motion control levers to the “NEUTRAL
LOCK” position.
4. Turn the key switch to the “START” position.
5. The engine must not crank.
Test 2 (operator on the seat)
1. Do not set the parking brake (release it from test 1).
2. Set the PTO switch to the
“DISENGAGE” (OFF)
position.
3. Set the motion control levers to the “NEUTRAL
LOCK” position.
4. Turn the key switch to the “START” position.
5. The engine must not crank.
PERIODIC SERVICE EVERY 50 HOURS
50
Z231BR-AU,Z231KH-AU,Z251BR-AU,Z251KH-AU