Kubota Z231BR-AU, Руководство оператора

Страница: 11 / 85

SERVICING AND STORAGE
1. Servicing the machine
• Before servicing, park the machine on a firm, level
surface and apply the parking brake. Remove the
key to prevent an accidental start-up.
• Allow the machine time to cool before touching the
engine, muffler and so on.
• Always stop the engine before refueling. Avoid
spills and overfilling.
• If fuel is spilled, do not attempt to start the engine
and avoid creating any source of ignition until fuel
vapors have dissipated.
(1) Fuel tank cap
• Use extra care when handling gasoline fuels. They
are flammable.
1. Use only an approved container.
2. Do not remove the fuel cap or refuel with the
engine running. Allow the engine to cool before
refueling. Do not smoke while refueling or when
standing near fuel.
3. Do not refuel the machine indoors and always
clean up spilled fuel or oil.
4. Do not store the machine or fuel container
inside where there is an open flame, such as in
a water heater.
• Do not smoke when working around battery or
when refueling. Keep all sparks and flames away
from battery and fuel tank.
A battery, especially when charging, will give off
hydrogen and oxygen gases, which can explode
and cause serious personal injury.
• Before “jump starting” a dead battery, read and
follow all the instructions.
• Disconnect the battery's ground cable before
working on or near electric components.
• Do not use or charge the refillable type battery if the
fluid level is below the [LOWER] (lower limit level)
mark. Otherwise, the battery component parts may
prematurely deteriorate, which may shorten the
battery's service life or cause an explosion. Check
the fluid level regularly and add distilled water as
required so that the fluid level is between the
[UPPER] and [LOWER] levels.
• Keep a first aid kit and fire extinguisher handy at all
times.
• Do not attempt to mount a tire on a rim unless
qualified to do so and all proper safety precautions
are followed.
• Always maintain the correct tire inflation pressure.
Do not inflate tires above the recommended
pressure shown in the operator's manual.
• Provide adequate support when changing wheels.
• Make sure that wheel nuts and bolts have been
tightened to the specified torque.
• Do not make adjustments or repairs with the engine
running.
• Keep the machine free of grass, leaves, or other
debris build-up.
• Do not change the engine governor setting or
overspeed the engine.
• Do not run the machine inside a closed area.
• Mower blades are sharp and can cut your hands.
Wrap the blade(s) or wear gloves, and use extra
caution when servicing them.
• Keep nuts and bolts, especially blade attachment
bolts, tight and keep equipment in good condition.
• Never tamper with safety devices. Check their
operation for proper function regularly.
• Waste products such as used oil, fuel, coolant,
brake fluid, and batteries can harm the
environment, people, pets and wildlife. Please
dispose of the waste products properly.
• Do not use beverage containers for waste fluids or
other products. Someone, particularly children, may
drink them by mistake.
• Securely support the machine or any machine
elements with stands or suitable blocking before
working underneath. For your safety, do not rely on
hydraulically supported devices as they may leak
down, suddenly drop or be accidently lowered.
• Consult your local recycling center or KUBOTA
Dealer to learn how to recycle or get rid of waste
products.
– A material safety data sheet (MSDS) provides
specific details on chemical products, physical
SAFE OPERATION
8
Z231BR-AU,Z231KH-AU,Z251BR-AU,Z251KH-AU