Kubota Z231BR-AU Скачать руководство пользователя | Manualshive

Страница: 46 / 85

background image

LUBRICANTS AND FUEL

Locations

Capacities

Lubricants

Z231BR-

AU

Z231KH-

AU

Z251BR-

AU

Z251KH-

AU

Fuel

16.3 L (4.3 U.S. gals.)

•

Automobile unleaded or regular gasoline

•

Unleaded gasoline 87 octane or higher

Engine crankcase

1.8 L (1.9 U.S.qts.)

•

Engine oil: API service
Classification ,

SG

,

SH

,

SJ

or higher

Above 10

℃

(50

℉

)...SAE30

Between -18

℃

(0

℉

) to 38

℃

(100

℉

)...SAE10W-30

Below 0

℃

(32

℉

)...SAE5W-30

Transmission case
with filter, hose and
tank (RH and LH)

4.8 L (5.1 U.S.qts.)

•

Engine oil: API service
Classification SL
SAE20W-50

*1

Oil amount when the oil level is at the upper level of the oil level gauge.

Fuel:

• Clean, fresh, unleaded gasoline.
• A minimum of 87 octane/87AKI (90 RON).
• Gasoline with up to 10% ethanol (gasohol) or up to 15% methyl tertiary butyl ether (MTBE) is acceptable.
• Do not use unapproved gasoline, such as E85. Do not mix oil in gasoline or modify the engine to run on alternate

fuels. This will damage the engine components and void the engine warranty.

• This engine is certified to operate on gasoline. The emissions control system for this engine is engine

modifications (EM).

• High altitude:

At altitudes over 5000 feet (1524 meters), a minimum 85 octane / 85 AKI (89 RON) gasoline is acceptable. To
remain emissions compliant, high altitude adjustment is required. Operation without this adjustment will cause
decreased performance, increased fuel consumption, and increased emissions.
Operation of the engine at altitudes below 2500 feet (762 meters) with the high altitude kit is not recommended.

• The indicated capacity of fuel is the manufacturer's estimate.

Engine oil:

• Oil used in the engine should have an American Petroleum Institute (API) service classification and proper SAE

Engine oil according to the ambient temperatures as shown in the previous table.

• Synthetic oil meeting the listed classifications may be used after 50 hours of run time.

LUBRICANTS AND FUEL

MAINTENANCE

Z231BR-AU,Z231KH-AU,Z251BR-AU,Z251KH-AU

43

«
...
44
45
46
47
48
...
»

Содержание Z231BR-AU






















































































Отзывы:

Нет отзывов

Похожие инструкции для Z231BR-AU

Бренд: MacDon Страницы: 2

Бренд: Yard Machines Страницы: 8

Бренд: Hayter Страницы: 6

Бренд: Simplicity Страницы: 48

Бренд: Matrix Страницы: 96

Бренд: Homelite Страницы: 36

Бренд: FGM Страницы: 33

Бренд: Toro Страницы: 60

Бренд: Scag Power Equipment Страницы: 96

Бренд: Weed Eater Страницы: 30

Бренд: Dolmar Страницы: 76

DR Field and Brush Mower

Бренд: Country Home Products Страницы: 31

Shop Series RS8080

Бренд: Rockwell Страницы: 16

Бренд: Black & Decker Страницы: 4

Бренд: Black & Decker Страницы: 8

Бренд: Black & Decker Страницы: 9

Бренд: Black & Decker Страницы: 8

Бренд: Black & Decker Страницы: 164

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды