Kubota Z231BR-AU, Руководство оператора

Страница: 36 / 85

NOTE :
• The motion control levers are adjustable.
(If adjustment is required, see ADJUSTMENT on
page 67.)
We recommend that you contact your local
KUBOTA Dealer.
STOPPING THE MACHINE
WARNING
To avoid serious injury or death:
• Park the machine on level ground.
If necessary to park on an incline, stop the
machine, apply the parking brake, and then stop
the engine.
• If you stop the engine on an incline without
applying the parking brake, the machine could
move and run away.
IMPORTANT :
• The parking brake lever is for parking use only.
If the parking brake is applied when the motion
control levers are not in the “NEUTRAL LOCK”
position, the engine will stop. This feature is to
prevent brake and transmission damage during
operation.
• If on a slope and the engine quits, use the
parking brake as the emergency brake and
immediately stop the unit.
1. Move both motion control levers to the “NEUTRAL”
position to stop the machine.
2. Move both motion control levers to the “NEUTRAL
LOCK” position.
3. Apply the parking brake.
4. Move the throttle lever to the half speed position
and push the PTO switch to the “DISENGAGE”
(OFF) position.
5. Lower all implements to the ground.
6. Turn off the engine and remove the key.
IMPORTANT :
• Do not stop the engine when the machine is
on an incline for a long time. The engine oil
may go into the carburetor and the muffler
through the valve system.
• Before stopping the engine, place the
throttle control lever in the half speed
position to help prevent the engine from
backfiring.
PARKING THE MACHINE
WARNING
To avoid serious injury or death:
Before leaving the operator's position:
• Apply the parking brake.
• Lower all implements to the ground.
• Shut off the engine.
• Remove the key.
• Place the motion control levers in the
“NEUTRAL LOCK” position.
To apply:
Place the parking brake lever in the “ENGAGED”
position.
To release:
Place the parking brake lever in the “DISENGAGED”
position.
If necessary to park on an incline, be sure to chock the
wheels on the downhill side to prevent accidental rolling
of the machine.
(1) Chock
TRANSPORTING THE MACHINE
IMPORTANT :
• To transport the machine on a trailer:
– Turn the carburetor fuel valve to the “OFF”
position.
– Fasten the machine to the trailer.
• Do not attempt to tow this machine, or damage
to the transmission may result.
• When transporting the machine over a long
distance:
– Make sure to lift the mower by the mower lift
pedal.
1. Hydrostatic transaxle bypass rods
WARNING
To avoid serious injury or death:
STOPPING THE MACHINE OPERATING THE MACHINE
Z231BR-AU,Z231KH-AU,Z251BR-AU,Z251KH-AU
33