background image

Operation

W9272-8135-1

147

05/2020

Filling up the washer system

Open the cap (1) of the washer system reservoir (2) and add 
water or a cleaning agent. 

Refuelling the machine

In winter, use a cleaning agent with antifreeze.

When refuelling the machine, smoking, an open flame, or other sources of ignition are not allowed. 
The danger zone has to be clearly marked with signs. A fire extinguisher must be kept at hand in the 
danger zone.

After refuelling the machine, be sure to tighten the filler cap and close the left service cover.

Spilled fuel must be bound immediately with an oil binding agent. The contaminated oil binding agent 
must be disposed of in accordance with the applicable environmental regulations.

If no pumping station is available, the diesel fuel may only be stored in approved canisters.

Refuel the machine in time so that the fuel tank is not running empty. Air in the fuel system can dam-
age the fuel injection pump.

While refuelling, be careful not to allow dust or dirt into the fuel tank.

Always remove spilled fuel immediately.

2

2

1

1

STOP

Содержание U50-5













































































































































































































































Отзывы: