Kubota U50-5, Руководство по эксплуатации

Страница: 127 / 236

Operation
W9272-8135-1
125
05/2020
One-way hold operation

Activate the operation setting for the "one way flow".
Switching on

Briefly push the one way hold switch (1). The oil flows on one
side to auxiliary port 1 (2) on the left side of the arm.
Switching off

Briefly press the one way hold switch to switch off the oil flow,
or

press the rocker switch for auxiliary port 1 (3) briefly to the right
or left to stop the oil flow.
Only when the auxiliary port function is enabled, the
rocker switch allows the oil to flow towards the auxilia-
ry port. If this function is disabled, no oil flows towards
the auxiliary port.
The message appears as in the figure on the right.
- Press the AUX enable switch first and then han-
dle the rocker switch.
For one way hold operation, the return change valve has to be set to the direct return flow position
(page 130).
The attachment can move in an uncontrolled and sudden manner, there is a danger to life in
the working area!
When using accessories that are not suitable for continuous oil flows (e.g. Powertilt), using the one-
way hold switch poses a danger to life!
The auxiliary port cannot be operated proportionally with the one-way hold switch. The flow volume
is adjusted to the highest level in the factory.
- Before using the one-way hold switch, check that the accessory is suitable for use with conti-
nuous oil flows.
- Before using the one-way hold switch, make sure that nobody is in the working area.
- The flow volume of the auxiliary port must be adapted to the accessory.
STOP
2
2
3
1