manualshive.com logo in svg

Kubota KJ-S130VX, Руководство оператора

Поделиться
Скачать
Kubota KJ-S130VX Скачать руководство пользователя страница 9

3

ENGLISH

SAFE OPERATION

KEEP  THE  AREA  AROUND  THE  ENGINE

CLEAN

¡

Be sure to stop the engine before cleaning.

¡

Keep the engine clean and free of accumulated dirt, grease
and trash to avoid a fire. Store flammable fluids away from
sparks and fire.

¡

DO NOT stop the engine without idling. Sudden stops
can cause temperatures around the engine to rise
suddenly. Keep the engine idling for about 5 minutes
before stopping.

SAFE  HANDLING  OF  FUEL  AND

LUBRICANTS

¡

Always stop the engine before refueling and/or
lubricating.

¡

DO NOT smoke or allow flames or sparks in the
working area. Fuel is extremely flammable and
explosive under certain conditions.

¡

Refuel only when the engine has cooled off. Refuel in a
well ventilated and open place. When fuel and
lubricants are spilled, clean them up before starting the
engine.

¡

DO NOT mix gasoline or alcohol with diesel fuel. The
mixture can cause a fire and damage engine
components.

¡

Operate the generator on a firm and level surface only.
DO NOT tilt or move the generator while it is running
since this can cause fuel spillage.

Содержание KJ-S130VX




































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды