manualshive.com logo in svg

Kubota KJ-S130VX, Руководство оператора

Поделиться
Скачать
Kubota KJ-S130VX Скачать руководство пользователя страница 67

51

ENGLISH

OPERATION AND INSPECTION OF THE EMERGENCY RELAY

OPERATION AND INSPECTION OF THE EMERGENCY RELAY

This is an automatic engine stopping device in case of
abnormal oil pressure or water temperature.
This device senses any abnormal oil pressure or
w a t e r   t e m p e r a t u r e   o c c u r r i n g   d u r i n g   e n g i n e
operation, and activates the stop solenoid to cut off
fuel to the fuel injection pump and stop the engine.
This relay has two independent timer functions, a
start relay and a stop relay.
The start relay does not activate this relay for a
specified time period after the engine has started. The
stop relay maintains conditions for a specified time
period after activating this relay and the stop
solenoid.

IMPORTANT:

¡

When this device stops the engine, it may be that
some minor damage to the engine has occurred.
To limit engine damage as much as possible,
please do not make the faulty assumption that it is
a perfectly safe device. Check unit prior to re-
starting.

Alarms and Corrective Measures

If a trouble occurs during operation, a corresponding indicator lamp lights up and the engine stops. Determine at
which lamp is ON, and pinpoint and correct the cause of trouble.

(1) Water temperature lamp

Lights up if the engine is overheating.

(2) Oil pressure lamp

Lights up if engine oil pressure  is too low.

(3) Battery charge lamp

Lights up if there is a battery problem or if the belt
is broken.

Light-up

Possible Causes

Countermeasures

Lamp (1)

Engine overheating.

*See "PRECAUTION OVERHEATING" in 
  "OPERATION" section. (See page 15)

Water temperature sensor faulty.

*Replace the water temperature sensor.

Water temperature sensor wiring faulty.

*Repair the wiring.

Lamp (2)

Insufficient engine oil.

*Add engine oil.

Lubricating system in trouble.

*Check the system.

Oil pressure sensor faulty.

*Replace the sensor.

Oil pressure sensor wiring faulty.

*Repair the wiring.

Lamp (3)

Fan belt loose or damaged.

*Readjust belt tension or replace the belt.

Alternator terminal in poor contact.

*Connect tightly.

Alternator problem.

*Check the alternator.

Содержание KJ-S130VX




































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды