manualshive.com logo in svg

Kubota KJ-S130VX, Руководство оператора

Поделиться
Скачать
Kubota KJ-S130VX Скачать руководство пользователя страница 41

25

MAINTENANCE

ENGLISH

NOTE:

Lubricating oil

With the emission control now in effect, the CF-4 and CG-4 lubricating oils have been developed for use of a low-
sulfur fuel for on-road vehicle engines. When an off-road vehicle engine runs on a high-sulfur fuel, it is advisable
to employ the CF, CD or CE lubricating oil with a high total base number. If the CF-4 or CG-4 lubricating oil is used
with a high-sulfur fuel, change the lubricating oil at shorter intervals.

¡

Lubricating oil recommended when a low-sulfur or high-sulfur fuel is employed.

쎱

 Checking Engine Oil Level

3

CAUTION:
To avoid personal injury:

¡

¡

¡

¡

¡

Be sure to stop the engine
before checking the oil level.

1.

Make sure the machine is on a flat surface.

2.

Check engine oil before starting the engine or 5
minutes or more after the engine has stopped.

3.

To check the oil level, draw out the dipstick, wipe
it clean, replace it, and draw it out again. Check to
see that the oil level lies between the two
notches.
If the level is too low, add new oil to the
prescribed level.
(See "Adding Engine Oil" in PREPARATION FOR
FIRST OPERATION Section)

IMPORTANT:

¡

When using an oil of different maker or viscosity
from the previous one, remove all of the old oil.
Do not mix two different types of oil.

¡

If oil level is low, do not run engine.

DAILY CHECK

For your own safety and maximum service life of the
machine, make a thorough daily inspection before
starting the engine.

3

CAUTION:
To avoid personal injury:

¡

¡

¡

¡

¡

Be sure to check or service the
generator on a flat place with
the engine shut off .

쎱

 Walk around Inspection

Look around and under the generator for such items
as loose bolts, trash build-up, oil or coolant leaks,
broken or worn parts.

Содержание KJ-S130VX




































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды