_
18
_
Brushcutter Operation
CAUTION
Read the Safety instructions beginning on page 3 concerning proper use of the Brushcutter.
WARNING
POTENTIAL HAZARD
・
Foreign objects can be thrown by Brushcutter.
WHAT CAN HAPPEN
・
Contact with thrown objects can cause personal injury.
HOW TO AVOID THE HAZARD
・
Never operate the Brushcutter without the blade guard in place.
WARNING
POTENTIAL HAZARD
・
Without the shoulder strap/harness installed, the Brushcutter blade can produce side thrust which can ex-
pose the operator and bystanders to blade contact.
・
If the Brushcutter is not correctly positioned on the operator’s right side, the blade can produce side thrust
which can expose the operator and bystanders to blade contact.
WHAT CAN HAPPEN
・
Contact with the Brushcutter blade can cause severe personal injury.
HOW TO AVOID THE HAZARD
・
Never operate the Brushcutter without installing and using the shoulder strap/ harness.
・
Always operate the Brushcutter with the unit on your right side.
Brushcutter Operating Position
Before using the Brushcutter, check the following:
1. The operator must be wearing the shoulder strap or shoulder
harness attached to the Brushcutter, and the Brushcutter must be
on the operator’s right side.
[Model KBC26-RS]
2. The operator’s right hand should be holding the shaft grip, with his
or her fingers on the throttle trigger. The right arm should be slightly
bent.
3. The left hand should be holding the loop handle with the fingers and
thumb fully enclosed around the grip. The left arm should be
extended. Reposition the loop handle up or down the shaft assembly
if necessary for a comfortable position.
[KBC26-RS]
Содержание KBC26-RS
Страница 27: ......