Kuberg Ranger Скачать руководство пользователя страница 33 | Manualshive

Страница: 33 / 38

Kuberg Ranger Скачать руководство пользователя страница 33

33

Ranger - OWNER‘S MANUAL

Towing a trailer

Your KUBERG Ranger can be equipped with the original KUBERG trailer, capable of towing
max. 30kg (66 lbs) of load.

WARNING!

Maximum speed with an attached trailer is 25 kmph (15 mph).

Attaching and detaching the trailer

1

Loosen the locking nut and divert the locking mechanism.

2

Check that the trailer coupler is greased sufficiently from its inner side. Deploy the

small ammount of grease if necessary.

3

Deploy the trailer to the motorcycle by pulling the trailer coupler onto the towing ball of

the Ranger. It should be done without a rezistance.

4

Close the locking mechanism and tighten the locking nut by hand.

5

Move the motorcycle forward and backwards, from left to right. Ensure the connection

between the motorcycle and the trailer is firm and enables the trailer rotation at the
same time.

6

To remove the trailer, reverse the prodedure above.

CAUTION!

Pay an extra attention to fix the load safely onto the trailer using a fixing straps (sold
separately). When riding with the trailer attached to the Ranger, regardless whether it is
empty or fully loaded, always be EXTRA CAREFUL. The additional weight may greatly
affect the riding behavior, especially when going down the hill, in turns and/or in wet
conditions. Never perform any jumps or hazardous driving with the trailer attached. Never
carry any other person or animal. Depending on the amout of an additional load, the
breaking distance of your motorcycle with attached trailer will warry. It is greatly advised
to brake much sooner than with the trailer detached. Never exceed the maximum load of
the trailer.

«
...
31
32
33
34
35
...
»

Содержание Ranger







































Отзывы:

Нет отзывов