Kuberg Ranger Скачать руководство пользователя страница 15 | Manualshive

Страница: 15 / 38

Kuberg Ranger Скачать руководство пользователя страница 15

15

Speed & torque control button

The speed & torque control button allows a responsible adult to set motorcycle
maximum power and torque. There are three distinct power & torque modes.

Go to page 16

to read detailed instructions concerning how to set the various

power & torque modes. Do not attempt to guess or assume these settings. Always
check them before allowing the rider back on the motorcycle.

Charging port

When it’s time to recharge the motorcycle,
the battery charger connector attaches
to this port. Before attaching, ensure that
the power is switched to the off position.
Please refer to the battery and charging
section

(page 28)

of this manual for more

information.

WARNING!

The power on the motorcycle must be switched OFF before attaching and plugging in
the charger.

LCD Charge indicator

The LCD battery charge indicator is located on the steering stem and shows the battery
percentage status and voltage.

Setting up your Kuberg

Ranger for riding

WARNING!

Improper set-up is dangerous! It is your responsibility to set the motorcycle to the
ability of the rider. Failure to do so, may result in injury or death, and/or damage to your
motorcycle.

NOTE:

A responsible adult must ensure that the KUBERG Ranger and its rider are prepared for
every ride. The motorcycle must be set to the abilities of the rider, and the rider and the
motorcycle must be supervised when ridden by a child or a teenager. Novice riders can lose
concentration quickly, and be easily distracted. If the power is set too high, an accident
could occur.

RIDE SAFE!

«
...
13
14
15
16
17
...
»

Содержание Ranger







































Отзывы:

Нет отзывов