Kuberg Ranger Скачать руководство пользователя страница 13 | Manualshive

Страница: 13 / 38

Kuberg Ranger Скачать руководство пользователя страница 13

14

Install the footrail onto its place and tighten all bolts and

nuts (15 - 16 Nm). The 2 nuts act as an additional bolts
locking.

15

Make sure the on/off switch is in off position and using

the Allen wrench #3 and #4 unscrew 3 bolts holding the
inspection lid.

16

Connect two main battery connectors (red to red and black to black) and the BMS

(battery management system) connector (yellow).

17

Put the inspection lid back on its place and screw in all 3 bolts that were removed in

step #15 (2 - 3 Nm).

18

Double check that all bolts are on the place and tightened correctly.

WARNING!

Incorrect connecting of the battery wires to the motorcycle terminals may cause
irreparable damage to motorcycle electrical components.

First setup

1

Check the tire pressure of both tires and confirm that they are properly inflated. The

optimal tire pressure for the KUBERG Ranger is 35 – 50 PSI (2.4 – 3.4 bar) for general
use and should never exceed 50 PSI (3.4 bar).

2

Unpack the charger from its box and charge the batteries, being sure to follow the

correct charging procedure.

Go to page 28

to find detailed charging instructions.

3

Compress each brake lever. The lever should not compress completely to the

handlebar. Each individual brake should hold the motorcycle securely when you
push the motorcycle against the brake. If your brake needs adjustment,

follow the

instructions on page 21.

All riders should be aware which lever operates which brake.

4

Check the chain for tightness and lubrication and if needed, follow the section

Adjusting chain tension

on page 16.

5

Set the power and torque settings to an adequate level for the rider’s experience and

riding skills.

Go to page 16

to find detailed instructions concerning how to set speed

limits and different riding modes.

WARNING!

There are no user serviceable elements incorporated into the motor, motor controller,
batteries, battery charger, throttle, or wiring harness of your KUBERG electric motorcycle.
DO NOT ATTEMPT TO DISASSEMBLE OR ADJUST ANY OF THESE COMPONENTS. Doing
so may cause extensive damage to these components, will void your warranty, and may
result in danger to persons and/or property. If you cannot resolve any problem using this
owner’s manual, contact your KUBERG authorized dealer, or call the KUBERG Customer
Service for assistance.

13

«
...
11
12
13
14
15
...
»

Содержание Ranger







































Отзывы:

Нет отзывов