Kuberg Ranger Скачать руководство пользователя страница 28 | Manualshive

Страница: 28 / 38

Kuberg Ranger Скачать руководство пользователя страница 28

WARNING!

Only use the supplied battery charger. Using any other battery charger will void the
warranty and may damage the battery.

The LED light on the charger will illuminate RED while charging.

The LED light on the charger will illuminate GREEN when the battery is fully charged.

CAUTION!

The battery charger supplied with your KUBERG Ranger is for INDOOR use only.

Important notes about batttery charging

WARNING!

Do not cover the charger or its fan while charging, this can cause the charger to
overheat and may damage the charger and/or the motorcycle electrical components.

Avoid any contact with water or other fluids while charging the battery. If the battery,
charger or any connections become wet, immediately unplug the charger and
thoroughly dry all components.

Only charge under the constant supervision of an adult. Children must not operate
the charger.

Keep the charger and the motorcycle at least 3 m (10 ft) away from flammable items
and diret sunlight during charging.

Never dismantle or disassemble the supplied charger. Never use the supplied charger
for any purpose other than charging a KUBERG Ranger motorcycle.

Battery removal and installation

During normal use, KUBERG does not recommend removing the batteries from the
KUBERG Ranger. If you need to replace the battery or remove it, KUBERG highly
recommends taking the motorcycle to a certified technician or a KUBERG dealer.
If you choose to remove or replace the battery yourself, please follow the following
instructions carefully:

1

Ensure the power switch is in off position and engage the motorcycle stand

2

Using the Allen wrench #3 and #4 loosen and remove the 3 bolts holding the

inspection lid.

3

Note the colors of both battery terminals. When reconnecting, each wire must be

connected to the correct terminal - red to red and black to black. Disconnect the
two main battery connectors (red and black), one at a time, and the BMS (battery
management system) connector (yellow).

4

Push the remaining positive and negative wires to the front and sides of the

motorcycle, so the battery pack can be carefully pulled out.

5

Using the Allen wrench #5 loosen and remove 2 bolts from the right lower battery

holder.

28

«
...
26
27
28
29
30
...
»

Содержание Ranger







































Отзывы:

Нет отзывов