KTR-Group DATAFLEX 42/1000, Инструкция по эксплуатации и сборке

Страница: 2 / 21

DATAFLEX
®
42/1000
Torque Measuring Shaft
Operating/Assembly instructions
KTR-N
Sheet:
Edition: 49016 EN
2 of 21
2
Please observe protection
note ISO 16016.
Drawn: 2017-01-02 Shg/Koe Replaced for: KTR-N dated 2015-04-13
Verified: 2017-01-02 Shg Replaced by:
DATAFLEX
®
is a maintenance-free torque measuring shaft with integrated speed measurement. Com-
bined with the steel lamina coupling RADEX
®
-N the complete system forms a torsionally stiff, double-
cardanic coupling with integrated measuring shaft.
1 Technical data 3
2 Advice 5
2.1 General advice 5
2.2 Safety and advice symbols 5
2.3 General hazard warnings 5
2.4 Intended use 6
3 Storage, transport and packaging 6
3.1 Storage 6
3.2 Transport and packaging 6
4 Assembly 7
4.1 Components of DATAFLEX
®
torque measuring shaft 7
4.2 Advice for finish bore 8
4.3 Displacements - alignment of the torque measuring shaft 8
4.4 Assembly of the hubs 9
4.5 Assembly of the RADEX
®
-N clamping ring hubs on the DATAFLEX
®
torque measuring
shaft 9
4.6 Assembly of hubs on the driving and driven side 10
4.7 Assembly of lamina sets 11
4.8 Tightening torque of the setscrews 11
4.9 Advice for assembly of the DATAFLEX
®
torque measuring shaft 12
4.10 Technical description 12
5 Disposal 20
6 Maintenance and service 20
7 Services, customer service addresses 20
8 EC Certificate of conformity 21
Table of contents