KTM 690 SMC USA 2010 Скачать руководство пользователя страница 92

Страница: 92 / 196

MAINTENANCE WORK ON CHASSIS AND ENGINE

100254-10

–

Remove screws



–

Remove cover



with membrane



–

Add brake fluid to level



Guideline

Measurement of



5 mm (0.2 in)

Brake fluid DOT 4 / DOT 5.1 (

p. 181)

–

Position the cover with the membrane. Mount and tighten the screws.

Info

Clean up overflowed or spilt brake fluid immediately with water.

9.34

Checking the front brake linings

Warning

Danger of accidents

Reduced braking efficiency caused by worn brake linings.

–

Change worn brake linings immediately. (Your authorized KTM workshop will be glad to help.)

Note

Danger of accidents

Reduced braking efficiency caused by damaged brake discs.

–

If the brake linings are not changed in time, the steel brake lining carriers grind on the brake disc. The braking effect is greatly
reduced and the brake discs are rendered unserviceable. Check the brake linings regularly.

Содержание 690 SMC USA 2010





































































































































































































Результаты поиска

Содержание 690 SMC USA 2010

Отзывы:

KTM 690 SMC USA 2010, Руководство пользователя, Страница: 92 / 196

Результаты поиска

Содержание 690 SMC USA 2010

Отзывы: