KTM 690 SMC USA 2010 Скачать руководство пользователя страница 54 | Manualshive

Страница: 54 / 196

KTM 690 SMC USA 2010 Скачать руководство пользователя страница 54

RIDING INSTRUCTIONS

52

Warning

Danger of accidents

Unstable handling characteristics.

–

Do not exceed the maximum permitted weight and axle loads. The overall weight consists of: motorcycle operational and with a
full tank, driver and passenger with protective clothing and helmet, baggage.

Warning

Danger of accidents

Unstable handling characteristics due to slipped baggage.

–

Check the way your baggage is fixed regularly.

Warning

Danger of accidents

Lack of roadworthiness.

–

After a fall, check the vehicle as usual before putting it into operation.

Note

Engine failure

Unfiltered intake air has a negative effect on the service life of the engine.

–

Never ride the vehicle without an air filter since dust and dirt can get into the engine and result in increased wear.

Note

Engine failure

Overheating of engine.

–

If the coolant temperature warning lamp lights up, stop and switch off the engine. Allow the engine to cool down and check the
coolant level in the radiator, and top up if necessary. If you continue with the coolant temperature warning lamp alight, you may have
engine failure.

Info

If you hear unusual noises while riding, stop immediately, switch off the engine and contact an authorized KTM workshop.

«
...
52
53
54
55
56
...
»

Содержание 690 SMC USA 2010





































































































































































































Отзывы:

Нет отзывов