KTM 690 SMC USA 2010 Скачать руководство пользователя страница 65

Страница: 65 / 196

MAINTENANCE WORK ON CHASSIS AND ENGINE

9.3

Jacking up rear of motorcycle

Note

Danger of damage

The parked vehicle may roll away or fall over.

–

Always place the vehicle on a firm and even surface.

600492-01

–

Insert the work stand adapter in the work stand and screw it into the link forks.

Work stand adapter (61029055110)
Work stand rear (61029055100)

–

Stand the motorcycle upright, align the work stand to the rear, and jack up the motorcy-
cle.

9.4

Taking the rear from the work stand

Note

Danger of damage

The parked vehicle may roll away or fall over.

–

Always place the vehicle on a firm and even surface.

–

Secure the motorcycle against falling over.

–

Remove the work stand from the rear and lean the vehicle on the side stand.

Содержание 690 SMC USA 2010





































































































































































































Результаты поиска

Содержание 690 SMC USA 2010

Отзывы:

KTM 690 SMC USA 2010, Руководство пользователя, Страница: 65 / 196

Результаты поиска

Содержание 690 SMC USA 2010

Отзывы: