KTM 690 SMC USA 2010, Руководство пользователя, Страница: 62 / 196

SERVICE PLAN
60
K10N K75A K150A K300A
Check the front brake fluid level. ( p. 88) • • • •
Bleed the fork legs. ( p. 72) • • •
Check the steering head bearing play. ( p. 75) • • • •
Change the spark plug. • •
Check the valve clearance. x • • •
Check all hoses (e.g. fuel, cooling, bleeder, drainage, etc.) and bellows for cracking, leaks, and
correct routing.
x
• •
Check the antifreeze and coolant level. ( p. 136) • • • •
Check the cables for damage and routing without sharp bends. x • • •
Check that the throttle cables are undamaged, routed without sharp bends and set correctly. • • • •
Change the air filter. Clean the air filter box. x
• • •
Check/rectify the fluid level of the hydraulic clutch. ( p. 143) • • •
Check the screws and nuts for tightness. x
• • • •
Change the coolant. x
•
Change the front brake fluid. x • •
Change the rear brake fluid. x
• •
Check the clutch. x
• •
Check the headlight setting. ( p. 132) • • • •
Check that the radiator fan is functioning properly. x
• • • •
Final check: Check the vehicle for roadworthiness and take a test ride. • • • •
Read out the fault memory using the KTM diagnostics tool after a test ride. x • • • •
Make the service entry in KTM DEALER.NET and in the service record. x
• • • •
K10N: Once after 1,000 km (621.4 mi)