KTM 690 SMC USA 2010 Скачать руководство пользователя страница 86

Страница: 86 / 196

MAINTENANCE WORK ON CHASSIS AND ENGINE

1 2 3

16 17 18

400409-10

–

Shift into neutral; pull the lower chain section with specified weight



Guideline

Weight of chain wear measurement

15 kg (33 lb.)

–

Measure distance



of 18 chain links in the lower chain section.

Info

Chain wear is not always even, so you should repeat this measurement at differ-
ent chain positions.

Maximum distance



at the longest

chain section

272 mm (10.71 in)

» If distance



is greater than the specified measurement:

–

Replace the chain.

Info

When the chain is replaced, the rear sprocket and engine sprocket
should also be changed.
New chains wear out faster on old, worn sprockets.
For safety reasons, the chain has no chain joint.

400925-01

–

Check the chain sliding guard for wear.
» If the chain sliding guard is worn:

–

Replace the chain sliding guard.

–

Check that the chain sliding guard is firmly seated.
» If the chain sliding guard is loose:

–

Tighten the chain sliding guard.

Содержание 690 SMC USA 2010





































































































































































































Результаты поиска

Содержание 690 SMC USA 2010

Отзывы:

KTM 690 SMC USA 2010, Руководство пользователя, Страница: 86 / 196

Результаты поиска

Содержание 690 SMC USA 2010

Отзывы: