KTM 690 SMC USA 2010 Скачать руководство пользователя страница 91 | Manualshive

Страница: 91 / 196

KTM 690 SMC USA 2010 Скачать руководство пользователя страница 91

MAINTENANCE WORK ON CHASSIS AND ENGINE

89

Warning

Skin irritation

Brake fluid can cause skin irritation on contact.

–

Avoid contact with skin and eyes, and keep out of the reach of children.

–

Wear suitable protective clothing and goggles.

–

If brake fluid gets into your eyes, rinse thoroughly with water and contact a doctor immediately.

Warning

Danger of accidents

Reduced braking effect caused by old brake fluid.

–

Change the brake fluid of the front and rear brakes according to the service schedule. (Your authorized KTM workshop will be
glad to help.)

Warning

Environmental hazard

Hazardous substances cause environmental damage.

–

Oil, grease, filters, fuel, cleaners, brake fluid, etc., should be disposed of as stipulated in applicable regulations.

Info

Never use DOT 5 brake fluid! It is silicone-based and purple in color. Oil seals and brake lines are not designed for DOT 5 brake
fluid.
Avoid contact between brake fluid and painted parts. Brake fluid attacks paint!
Use only clean brake fluid from a sealed container!

–

Move the brake fluid reservoir mounted on the handlebar to a horizontal position.

«
...
89
90
91
92
93
...
»

Содержание 690 SMC USA 2010





































































































































































































Отзывы:

Нет отзывов