KTM 690 SMC USA 2010 Скачать руководство пользователя

Страница: 77 / 196

MAINTENANCE WORK ON CHASSIS AND ENGINE

9.19

Installing the fork protector

600633-10

–

Position the fork protection on the left fork leg. Mount and tighten screws



Guideline

Remaining screws, chassis

10 Nm (7.4 lbf ft)

–

Position the brake line and cable harness. Put the clamp on, mount and tighten
screws



–

Position the fork protection on the right fork leg. Mount and tighten the screws.
Guideline

Remaining screws, chassis

10 Nm (7.4 lbf ft)

9.20

Checking the steering head bearing play

Warning

Danger of accidents

Unstable vehicle handling from incorrect steering head bearing play.

–

Adjust the steering head bearing play without delay. (Your authorized KTM workshop will be glad to help.)

Info

If the bike is driven with play in the steering head bearing, the bearing and the bearing seats in the frame can become damaged
with time.

–

Jack up the motorcycle and secure it against falling over.

The front wheel is no longer in contact with the ground and the fork legs are no
longer under tension.

Содержание 690 SMC USA 2010





































































































































































































Результаты поиска

Содержание 690 SMC USA 2010

Отзывы:

Похожие инструкции для 690 SMC USA 2010

Бренды по названию

Популярные бренды

KTM 690 SMC USA 2010, Руководство пользователя

Результаты поиска

Содержание 690 SMC USA 2010

Отзывы:

Похожие инструкции для 690 SMC USA 2010

Бренды по названию

Популярные бренды