ESP
ANOL
FRANCAIS IT
ALIANO
ENGLISH
DEUTSCH
4
Scope of supply
1x rear bag
1x protective fi lm
2x D-ring fi xing loops
4x fastening straps
1x water-tight inner pocket
- Position the rear bag
(included) on the rear part.
NOTE:
If necessary, the protective fi lm
(included) may be cut and
attached to the painted parts of the rear.
- Thread in the fastening straps
(included) on the left and
right of the license plate holder and fasten with the provided
clip closures of the rear bag.
- Thread in the fastening straps
(included) on the left and
right of the frame and fasten with the provided clip closures
of the rear bag.
As an option, the fastening straps
may also be mounted
on the license plate. To do so, mount the fi xing loops
(included) using the upper license plate screws on the left
and right, and then thread the fastening straps
through the
loops.