KSR Ride Speedy, Руководство по ремонту

Страница: 64 / 79

ELECTRICAL SYSTEM/ LIGHTNING SYSTEM
64
BULBS REPLACEMENT GENERAL INFORMATIONS
PREPARATORY DATA
Precautions on operation:
While trouble shooting electric faults, please check continuity of
electric component as current flowing over it.
Confirm state of battery before any inspection,including battery voltage.
FAULT DIAGNOSIS
1. Turn on the main switch and the light switch.
2. Check rear light, front position light and low beam.
3. Turn on high beam and check if high beam is working.
4. Apply the front brake and check if brake light is working.
5. Apply the rear brake and check if brake light is working.
6. Turn on the left and right winker and check all winkers are working.
If the relative light is not working a reason could be:
1. A defect bulb.
2. A defect light switch.
3. The connector has a poor contact or the wire is broken.
4. The battery voltage is low.
5. If there is no electric power at all main fuse could be burned also.
HEADLIGHT BULB REPLACEMENT
1. Remove the front handlebar cover.
2. Pull out the rubber pad (1).
3. Pull out (arrow) the plug (2).
4. Unthread the locking spring (3) to remove
the headlight bulb(4).
5. Replace the defect bulb.
6. Assembling in reversed order.
2
1
3
4