KSR Ride Speedy, Руководство по ремонту

Страница: 50 / 79

SUSPENSION 50
SPECIAL TOOLS
There are no special tools recommended because defect
suspension elements may not be dissembled. Always´s replace
defect suspension elements.
TROUBLESHOOTING
FAILURE CAUSE TO DO
Vehicle difficult to steer
Insufficient tire pressure Adjust the tire pressure
Broken or bent fork leg Replace the affected fork leg
Uneven front shock
absorbers
Control and adjust or replace affected
fork leg
Soft front shock absorber
Weak shock spring Replace the affected fork leg
Insufficient damper oil Replace the affected fork leg
Front shock absorber noise
Broken or bent fork leg Replace the affected fork leg
Loose fork fasteners Tighten the fasteners
Lack of lubrication Replace the affected fork leg
Leaking fork leg Gasket defect Replace the affected fork leg
Weak rear shock absorber
spring
Spring worn or broken Replace the rear shock absorber
Leaking rear shock
absorber
Gasket defect Replace the rear shock absorber
Before each repair of a defect suspension element
consider the max.cross weight of the vehicle.
FRONT SUSPENSION REPLACEMENT
1. Place an appropriate supporting stand under the
engine in order to raise the front wheel up.
2. Remove the front and rear handlebar cover (1),
the front middle cover (2), the front mudguard (3),
the front wheel (4) and the front brake calliper (5).
1. When you replace parts 1 and 2 it is recommended to
disconnect all electric wires.
2. When you replace the front brake calliper you must
Release the brake hose from the triple tree but it is
not recommended to disconnect the brake hose from
the front brake calliper or the master brake cylinder.
3. Remove the bolt (6), which connects the handlebar
and the fork shaft.
NOTE
NOTE
A