
40
Environmental requirements for transport and storage
Temperature: m5°C – maximum 40°C, 93% RH
Environmental requirements for use
Temperature: m5°C – maximum 40°C
Humidity: 15%–93 %
Air pressure: 700–1060 hPa
Weighted sound power level A: less than 70 dbA
Technical Specifications
Applied parts: type B
Insulation Class: Internal Electric Source
Battery Charger Insulation Class: Class II
Device IP protection rating: IPx4
Battery charger IP protection rating: IPx0
Intended for use in an OXYGEN‐RICH ENVIRONMENT: NO
Intermittent operation: duty cycle (active cycle) 10%, with maximum consecutive operation of two
minutes, as follows:
Continuous operation: maximum 2 minutes.
Cycle of use: for every 2 minutes of operation (motor running), wait for 18 minutes (motor off) to
allow the accumulated heat to dissipate.
Power supply (battery charger): 240 VAC, 50 Hz, single‐phase
Internal power source: 24 VDC, rechargeable batteries
Battery charger power: 42 VA
Device current draw: 8.5 A
41
7.10
User Interface
The user interface of the device consists of buttons and levers with which the device is
controlled/adjusted.
1.
Footplate for adjusting the width of the base: reduce the
distance
2.
Footplate for adjusting the width of the base: increase the
distance
3.
Ascend push‐button
4.
Descend push‐button
5.
Emergency push‐button
6.
LED for battery charger status
7.
Emergency lowering device
8.
Vertical lever for adjusting the base
9.
Hydraulic pusher actuator
10.
Valve for lowering the hydraulic pusher
11.
Foot‐activated caster wheel brake
1
2
122
123
Содержание N305-150
Страница 41: ...Note Note 158 159...
Страница 42: ......